|
|
|
|
RCS, Refrigerator Compressor Stroke |
|
|
RBS, Refrigerator Balancer Position |
|
|
RCC, Refrigerator Compressor Current |
|
|
RBC, Refrigerator Balancer Current |
|
|
RAO, Refrigerator Accelerometer Output |
|
|
TRCH, Temperature Cold Head |
|
|
O1, Detector #1 Offset (Counts) |
|
|
O2, Detector #2 Offset (Counts) |
|
|
O3, Detector #3 Offset (Counts) |
|
|
O4, Detector #4 Offset (Counts) |
|
|
O5, Detector #5 Offset (Counts) |
|
|
O6, Detector #6 Offset (Counts) |
|
|
O7, Detector #7 Offset (Counts) |
|
|
TFO1VG1, focal plane (Deg K) |
|
|
TFO1VG2, focal plane (Deg K) |
|
|
TFO2VG1, focal plane (Deg K) |
|
|
TFO2VG2, focal plane (Deg K) |
|
|
TFO3V, top of cold link (Deg K) |
|
|
TFO4V, top of cold link (Deg K) |
|
|
TFO5V, bottom of cold link (RF cold block) (Deg K) |
|
|
TFO6V, bottom of cold link (Deg K) |
|
|
DELTA_T1-5, Temperature Delta between TFO1VG2 and TFO5 (milliAmps) |
|
|
DELTA_T3-6, Temperature Delta between TFO3 and TFO6 (milliAmps) |
|
|
TTO1V, optics radiator near aperture top left (Deg K) |
|
|
TTO2V, optics radiator near aperture bottom (near wax actuator) (Deg K) |
|
|
TTO3V, baffle near aperture top left (Deg K) |
|
|
TTO4V, baffle hot spot (scan housing at IFC) (Deg K) |
|
|
TTO5V, baffle near rear joint (baffle/scan housing interface) (Deg K) |
|
|
TTO6V, baffle wall near bearing right (Deg K) |
|
|
TTO7V, baffle wall near encoder (near lower scan housing) (Deg K) |
|
|
TTO8V, encoder mount front (radiator side) (Deg K) |
|
|
TTO9V, encoder mount back (IFC side) (Deg K) |
|
|
TTO10V, fore-optics s/c side (Deg K) |
|
|
TTO11V, IFC #1 (Deg K) |
|
|
TTO12V, IFC #2 (Deg_K) |
|
|
TTO13V, IFC #3, (Deg K) |
|
|
TTO14V, fore-optics radiator (re-imager near focal plane) (Deg K) |
|
|
TTO15V, chopper base t (Deg K) |
|
|
TTO16V, chopper base left (Deg K) |
|
|
TMO1V, refrigerator mount top (TRW refrigerator) |
|
|
TMO2V, refrigerator mount bottom of cone (Deg K) |
|
|
TMO3V, elec radiator at ref mount base (Deg K) |
|
|
TMO4V, elec radiator at electronics box (Deg K) |
|
|
TMO5V, electronics box hot spot (TRW side) (Deg K) |
|
|
TMO6V, electronics box back (Deg K) |
|
|
TMO7V, elec radiator at RFE box (Deg K) |
|
|
TMO8V, RFE box hot spot (Deg K) |
|
|
TMO9V, RFE box back (near e-box & elec rad) (Deg K) |
|
|
TCO1V, cover deploy system (wax actuator top side) (Deg K) |
|
|
TCO2V, cover deploy system (wax actuator cooler side) (Deg K) |
|
|
TEO1V, electronics box 215 PS5 (Deg K) |
|
|
TEO2V, electronics box 214 PS11 (Deg K) |
|
|
BBMON, blackbody set voltage (Deg K) |
|
|
BBSETV, blackbody set temperature (Deg K) |
|
|
JSCUR1, jones source 1 current (milliAmps) |
|
|
JSCUR2, jones source 2 current (milliAmps) |
|
|
JSCUR3, jones source 3 current (milliAmps) |
|
|
V1+5, DC/DC #1 +5V (Volts) |
|
|
V2+15, DC/DC #2 +15V (Volts) |
|
|
V2 -15,DC/DC #3 -15V (Volts) |
|
|
V4+5, DC/DC #4 +5V (Volts) |
|
|
V5+15, DC/DC #5 +15V (Volts) |
|
|
V5-15, DC/DC #6 -15V (Volts) |
|
|
V6+15, DC/DC #7 +15V (Volts) |
|
|
V7+15, DC/DC #8 +15V (Volts) |
|
|
V7-15, DC/DC #9 -15V (Volts) |
|
|
V9+5, DC/DC #10 +5V (Volts) |
|
|
V10+28, DC/DC #11 +28V (Volts) |
|
|
SB_PWR_CUR, saber PG1 current (millAmps) |
|
|
SB_OP_HTR_CUR, saber op heater current (millAmps) |
|
|
SABER_PWR, saber power, Watts |
|
|
SB_SV_HTR_CUR, saber survival heater current (millAmps) |
|
|
TSC_IF1, interface 1 (Deg K) |
|
|
TSC_IF2, interface 2 (Deg K) |
|
|
TSC_OPRAD, optical radiator (Deg K) |
|
|
TSC_ENMAS, encoder/motor assembly (Deg K) |
|
|
TSC_COOMT, cooler mount (Deg K) |
|
|
TSC_EBOX, electronics box (Deg K) |
|
|
CHOPAMP, Chopper Amplitude (VoltsRMS) |
