Command Name,Command Description
No-Op Test Script,Test SABER/MOC/POC connection
Uplink1,Dump PROM and EEPROM for analysis
Systemreset,Restart SABER from Power-up
Uplink4.cmd,Turn on Wax Actuators and Release Cover
Uplink2,Diagnostic Scan for Jones Sources and Power Groups
max_scan.cmd,Performs an adaptive scan between bottom of scan and top of scan
Adaptive scan on script,Turns the adaptive scan on
OFFADJ,Performs an offset adjustment routine and returns to data collection
Adscoff.scmd,Disables the adaptive scan
COOLER_OFF,Turns off SABER's cryo-cooler
COOLER_ON_SET_TEMP,Turns SABER's cryo-cooler back on and sets the temperature to 74K
Adsc3_eestb.scmd,Combines the turn on and seed of the adaptive scan with the EE stabilization routine
Adscon3.cmd,Turns on the Adaptive Scan
Adscon.cmd,Turns on the Adaptive Scan (old version)
Adscoff.cmd,Disables the Adaptive Scan
ee_mod_02_01_02.cmd,Sets the loop count value for the main routine to 5, offset adjustment routine run once every 2 hours
SpaceLookStare.cmd,Move mirror to top of scan and wait there for one minute
DataChannelOffAdj.cmd,Adjusts the offsets for all data channels
LowBBTemp.scmd,Sets the temperature of the IFC blackbody to 227 degrees
NomBBTemp.scmd,Sets the temperature of the IFC blackbody to 247 degrees
ScanGainCal.scmd,Used to characterize the scaling factor between medium and low gain for channels 5 - 7.
Stabilize.cmd,Executes the EE Stabilize routine - checking and setting all parameters before beginning Data Collection.
EEPROM Modification File,Modify EEPROM to remove the cooler caging and uncaging commands and to bypass the Acquisition Scan
WIHOME.cmd,Wait Indefinitely with the mirror in the Home Position
ee_mod_1_22_02.cmd,Sets the loop count value for the main routine to 10, offset adjustment routine run once every 4 hours
EEPROM Modification File--Sun Safe Routine,Modified Sun Safe Routine in EEPROM to Stow Mirror and Wait Indefinite
SunSAFE.cmd,Test the Sun Safe Routine in EEPROM
EEPROM_change_1_30_02_file1.scmd,Changed the EEPROM count comparison values from 50 to 300
EEPROM_change_1_30_02_file2.scmd,Changed the EEPROM count comparison values from 50 to 300
EEPROM_change_1_30_02_file3.scmd,Changed the EEPROM count comparison values from 50 to 300
EEPROM_change_1_30_02_file4.scmd,Changed the EEPROM count comparison values from 50 to 300
eemod_ch1_1_31_02.scmd,Changed the EEPROM count comparison values from 50 to 200
eemod_ch2_1_31_02.scmd,Changed the EEPROM count comparison values from 50 to 500
eemod_ch3_1_31_02.scmd,Changed the EEPROM count comparison values from 50 to 500
eemod_ch5_1_31_02a.scmd,Changed the EEPROM count comparison values from 50 to 200
eemod_ch5_1_31_02b.scmd,Changed the EEPROM count comparison values from 50 to 200
eemod_ch6_2_26_02.scmd,Changed the EEPROM count comparison values from 50 to 100
eemod_ch7_2_26_02.scmd,Changed the EEPROM count comparison values from 50 to 100
ee_mod_05_30_02.scmd,Sets the loop count value for the main routine to 1, offset adjustment routine run once every 30 minutes
ee_mod_02_01_02.cmd,Sets the loop count value for the main routine to 5, offset adjustment routine run once every 2.5 hours
Moon_Look_Timer1.scmd,Add Moon Look routines to EEPROM
Moon_Look_Timer2.scmd,Add Moon Look routines to EEPROM
Moon_Look_Timer3.scmd,Add Moon Look routines to EEPROM
Moon_Look_Timer4.scmd,Add Moon Look routines to EEPROM
Moon_Look_Timer5.scmd,Add Moon Look routines to EEPROM
Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Moon_Look_EEPROM_Addendum1.scmd,Add Moon Look routines to EEPROM
Moon_Look_Initialize_Test.scmd,Initialize values for on-orbit test of Moon Look routines
Moon_Look_Initialize.scmd,Initialize values for Jan 2003 Moon Look routines
Mar_22_2003_Moon_Look_Timer_Loops.scmd,Write new routine start times to EEPROM
Mar_22_2003_Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Mar_22_2003_Moon_Look_Initialize.scmd,Initialize values for Mar 2003 Moon Look routines
Apr_2003_Scan_Mirror_Tests.scmd,Exercise the scan mirror for analysis
Apr_16_2003_Moon_Look_Timer.scmd,Write new routine start times to EEPROM
Apr_16_2003_Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Apr_16_2003_Moon_Look_Initialize.scmd,Initialize values for Apr 2003 Moon Look routines
Aug_12_2003_Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Aug_12_2003_Moon_Look_Timer.scmd,Write new routine start times to EEPROM
Aug_12_2003_Moon_Look_Initialize.scmd,Initialize values for Aug 2003 Moon Look routines
Oct_06_2003_Moon_Look_Timer.scmd,Write new routine start times to EEPROM
Oct_06_2003_Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Oct_06_2003_Moon_Look_Initialize.scmd,Initialize values for Oct 2003 Moon Look routines
Calibration_Scan.scmd,Write new calibration scan routine to EEPROM
Initialize_Calibration_Scan.scmd,Initialize time for calibration scan routine for Jan 24
Mar_01_2004_Moon_Look_Timer_Loops.scmd,Write new routine start times to EEPROM
Mar_01_2004_Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Mar_01_2004_Moon_Look_Initialize.scmd,Initialize values for Mar 2004 Moon Look routines
CalScan_SlewEarth2Space_Timer.scmd,Write SlewEarth2Space calibration scan routine to EEPROM
CalScan_SlewE2S_Timer_Initialize.scmd,Initialize time for SlewEarth2Space calibration scan routine for Mar 19
Adscoff_COOLER_OFF.scmd,Turns off the adaptive scan, seeds the limits, and then turns the cooler off
OFFADJ_Adscon3.scmd,Commands SABER to the offset adjustment routine, then turns the adaptive scan back on
Mar_10_2005_Moon_Look_Angles.scmd,Upload scan mirror angles to RAM
Mar_10_2005_Moon_Look_Timer.scmd,Write new routine start times to EEPROM
Mar_10_2005_Moon_Look_Initialize.scmd,Initialize values for Mar 2005 Moon Look routines